[j-nsp] MC-LAG and layer 3 routing

[bhaskar vangala]

Please ignore if you have gone through the below documentation already....

http://www.juniper.net/techpubs/en_US/junos14.2/topics/concept/interfaces-active-active-bridging-and-vrrp-over-irb-mx.html

In an IPv6 network, you cannot configure an MC-LAG in an active-active
bridge domain if you specified the vlan-id none statement at the [edit
bridge-domain *bd-name*] hierarchy level. The vlan-id none statement that
enables the removal of the incoming VLAN tags identifying a Layer 2 logical
interface when packets are sent over VPLS pseudowires is not supported for
IPv6 packets in an MC-LAG.