[j-nsp] eBGP Failover

[Peter Ehiwe]

Possible options :
1) link bundling technologies   And run single  ebgp session over the
bundle
2) two ebgp sessions with shorter keep Alive
3) two ebgp sessions with bfd

Sent from a mobile .

On Tuesday, June 30, 2015, Mohammad Khalil <eng.mssk at gmail.com> wrote:

> Hi all
> I have a case where my router is connected to the upstream provider via two
> physical links , we decided to configured eBGP over a loopback interface
> The issue is that when the remote peer goes down (over which I have learned
> the loopback from through static routing) , the route will still be
> installed in my routing table (because from my side it's up) , so I will
> lose connectivity and my eBGP neighbor will go down
> So , what is the best redundancy solution I can implement so that I will
> not lose my peering and switch over to the other static route without
> disrupting my service?
>
> Thanks
>
> BR,
> Mohammad
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net <javascript:;>
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


-- 
Sent from Mobile