[j-nsp] L2 tunnel over IP on ex4200-24t

[Raphael Mazelier]

Le 12/05/15 10:27, Mark Tees a écrit :
> l2circuit is not supported as that requires a two label stack to work.
>
> EX4200's can only switch a 1 label stack. Any traffic passed in  P/LSR
> fashion that has more than 1 label in the stack gets dropped
> transparently from what I have seen, regardless of what the control
> plane/RE said.
>
> ccc/remote-interface-switch like in the link I sent earlier is the
> only way that works as far as I have seen. This is probably because of
> the 1:1 mapping of LSP to ccc direction.
>

Strange, because what I tested on Ex4550 is the opposite :
l2circuit are working, ccc not.

-- 
Raphael Mazelier