[j-nsp] Reset DSCP on ingress (again)

[Victor Sudakov]

Dear Colleagues,

Sorry for repeating the question.

What is the easiest method of resetting the dscp value in incoming
packets when the incoming port is configured for "family ethernet-switching"?

If the port were in "family inet", I would use the firewall, but the
"family ethernet-switching" firewall does not seem to have a means to
set dscp.

Thanks a lot in advance.

The device is EX4200-24T, 12.3R6.6

-- 
Victor Sudakov,  VAS4-RIPE, VAS47-RIPN
AS43859