[j-nsp] ACX5048 - 40 gbps ER 40 km optic

[Aaron Gould]

I put this into my ACX5048 in the lab today. actually 2 of them.
QSFP+-40G-ER4 (aka QSFPP-40GBASE-ER4) SMF 40 km 1310 nm optic

 

Optic is seen in cli, but I see no led's on chassis and when I plug them
into each other, interfaces stay up/down.

 

Is there something I need to do to make this 40 gig optic work in the
ACX5048 (JUNOS 15.1X54-D61.6) ?

 

{master:0}
agould at eng-lab-5048-2> show interfaces terse | grep et-
et-0/0/48               up    down
et-0/0/49               up    down

{master:0}
agould at eng-lab-5048-2> show interfaces et-0/0/48
Physical interface: et-0/0/48, Enabled, Physical link is Down
  Interface index: 657, SNMP ifIndex: 582
  Link-level type: Ethernet, MTU: 1514, LAN-PHY mode, Speed: 40Gbps, BPDU
Error: None, MAC-REWRITE Error: None, Loopback: Disabled,
  Source filtering: Disabled, Flow control: Disabled, Media type: Fiber
  Device flags   : Present Running Down
  Interface flags: Hardware-Down SNMP-Traps Internal: 0x4000
  Link flags     : None
  CoS queues     : 8 supported, 8 maximum usable queues
  Current address: 20:4e:71:45:d3:d3, Hardware address: 20:4e:71:45:d3:d3
  Last flapped   : 2017-10-04 10:26:33 CDT (00:09:14 ago)
  Input rate     : 0 bps (0 pps)
  Output rate    : 0 bps (0 pps)
  Active alarms  : LINK
  Active defects : LINK
  Interface transmit statistics: Disabled

{master:0}
agould at eng-lab-5048-2> show interfaces et-0/0/49
Physical interface: et-0/0/49, Enabled, Physical link is Down
  Interface index: 658, SNMP ifIndex: 583
  Link-level type: Ethernet, MTU: 1514, LAN-PHY mode, Speed: 40Gbps, BPDU
Error: None, MAC-REWRITE Error: None, Loopback: Disabled,
  Source filtering: Disabled, Flow control: Disabled, Media type: Fiber
  Device flags   : Present Running Down
  Interface flags: Hardware-Down SNMP-Traps Internal: 0x4000
  Link flags     : None
  CoS queues     : 8 supported, 8 maximum usable queues
  Current address: 20:4e:71:45:d3:d7, Hardware address: 20:4e:71:45:d3:d7
  Last flapped   : 2017-10-04 10:27:53 CDT (00:07:56 ago)
  Input rate     : 0 bps (0 pps)
  Output rate    : 0 bps (0 pps)
  Active alarms  : LINK
  Active defects : LINK
  Interface transmit statistics: Disabled

{master:0}
agould at eng-lab-5048-2> show chassis hardware
Hardware inventory:
Item             Version  Part number  Serial number     Description
Chassis                                (removed...)      ACX5048
Pseudo CB 0
Routing Engine 0          BUILTIN      BUILTIN           ACX5K Routing
Engine
FPC 0            REV 07   650-060546   (removed...)      ACX5048
  CPU                     BUILTIN      BUILTIN           FPC CPU
  PIC 0                   BUILTIN      BUILTIN           48x10G-6x40G

    Xcvr 48      REV 01   740-059185   (removed...)      QSFP+-40G-ER4
    Xcvr 49      REV 01   740-059185   (removed...)      QSFP+-40G-ER4
Power Supply 0   REV 04   740-043886   (removed...)      JPSU-650W-DC-AFO
Power Supply 1   REV 04   740-043886   (removed...)      JPSU-650W-DC-AFO
Fan Tray 0                                               ACX5K Fan Tray 0,
Front to Back Airflow - AFO
Fan Tray 1                                               ACX5K Fan Tray 1,
Front to Back Airflow - AFO
Fan Tray 2                                               ACX5K Fan Tray 2,
Front to Back Airflow - AFO
Fan Tray 3                                               ACX5K Fan Tray 3,
Front to Back Airflow - AFO
Fan Tray 4                                               ACX5K Fan Tray 4,
Front to Back Airflow - AFO




{master:0}
agould at eng-lab-5048-2> show chassis pic pic-slot 0 fpc-slot 0
FPC slot 0, PIC slot 0 information:
  Type                             48x10G-6x40G
  State                            Online
  PIC version                  2.7
  Uptime                         99 days, 23 hours, 26 minutes, 3 seconds

PIC port information:
                         Fiber                    Xcvr vendor       Wave-
Xcvr
  Port Cable type        type  Xcvr vendor        part number       length
Firmware
  48   40GBASE ER4       SM    JUNIPER-FINISAR    FTL4E1QE1C-J3     1301 nm
0.0
  49   40GBASE ER4       SM    JUNIPER-FINISAR    FTL4E1QE1C-J3     1301 nm
0.0

 

- Aaron