[j-nsp] iSCSI on EX4550 switch port
Simone Spinelli
simone.spinelli at gmail.com
Fri Jun 8 01:55:59 EDT 2018
MTU?
Ethernet flow control?
My 2 cents.
Simone
On Fri, 8 Jun 2018 at 01:28, Jonathan Call <lordsith49 at hotmail.com> wrote:
> I have a NetApp using iSCSI sitting on an EX4550. The iSCSI port on the
> EX4500 is dropping packets on a regular basis, but its queue length is
> always zero:
>
> Queue counters: Queued packets Transmitted packets Dropped
> packets
> 0 best-effort 0 1518576563
> 1510331
> 1 assured-forw 0 0
> 0
> 5 expedited-fo 0 0
> 0
> 7 network-cont 0 138429
> 0
>
> Before I start messing with queues/Class of Service setting I'm curious if
> anyone has seen this before and might steer me in a good direction to find
> out what is going on? (Other than getting rid of this old EX4550)
>
> Jonathan
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
More information about the juniper-nsp
mailing list