[j-nsp] migration from cisco VRF+Vrrp to the juniper ACX

[A. Camci]

Hı James.

We get now acx5048 and problem solved :)

Same config works fine on the ACX5048. So there is hardware/software or
architecture  problem on the Acx5096.

 jtac is busy with the investigation.

Thanks for your help.

Br ap




Op wo 2 mei 2018 om 10:23 schreef James Bensley <jwbensley at gmail.com>

> On 1 May 2018 at 17:07, A. Camci <avciguzeli at gmail.com> wrote:
> > does anyone have an idea why it does not work on Acx( vrf+ vrrp).
> >
> > Br ap
>
> How have you tried to debug this set up?
>
> From your original em ail:"maybe vrf+vrrpdoesnt work on a ACX." - Have
> you confirmed this, are you trying something that isn't
> supported/supposed to work?
>
> "after migration to the ACX has customer no connection from the VRF.
> if we switch back to cisco, everything works fine" - How are you
> verifying this?
>
> When ACX is master have you checked ARP and MAC tables to see that
> physically traffic is being forwarded to the ACX?
>
> Is there a switch inbetween, correct VLANs are allowed on the correct
> ports? Are the MAC tables updated after master switch over?
>
> Have you checked the interface counters on the ACX to see that traffic
> is coming into the ACX?
>
> Can you run a packet capture on the ACX to see it is the correct
> traffic? Can you mirror the switch ports to check there too?
>
> Do you see any drop counters on the ACX?
>
> What have you actually done to debug this issue?
>
> Cheers,
> James.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>