[j-nsp] EX4550 L3VPN

[craig washington]

I personally have never heard of it.

Sounds very PRish to me, what code are you running and have you checked the Problem Report Search


________________________________
From: juniper-nsp <juniper-nsp-bounces at puck.nether.net> on behalf of Aaron Gould <aaron1 at gvtc.com>
Sent: Wednesday, May 30, 2018 11:48 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] EX4550 L3VPN

Please tell me if it's normal that I have to reboot a EX4550 (pair of them, virtual chassis) to get it to forward, after enabling a routing-instance of type vrf (aka mpls l3vpn)

Strange, after enabling igp (ospf), mpls, ldp, mp-ibgp and vrf/l3vpn, the l3vpn control plane looked fine locally and remotely... All seemed fine, except no forwarding.  I had a great JTAC engineer knee deep in the pfe, and he couldn't figure out what was wrong.... We rebooted it and bammo, it started forwarding.  That was the lab test.

Today, I did it on my data center 4550, and I'm seeing the same thing. I haven't rebooted this one yet though.  Having second thoughts of l3vpn prime-time on the 4550 and might haul it L2 to my neighboring MX960

Aaron
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
juniper-nsp Info Page - puck.nether.net<https://puck.nether.net/mailman/listinfo/juniper-nsp>
puck.nether.net
To see the collection of prior postings to the list, visit the juniper-nsp Archives.. Using juniper-nsp: To post a message to all the list members, send email to juniper-nsp at puck.nether.net.