[rbak-nsp] CLIPS on link-aggregated ports.

[Vladislav Vasilev]

There is a limitation with SE100 which basically prevents you from having an
access link-group with more than 1 port. You must have noticed that all your
ports begin with "2/x" which means they are on the same slot - 2.

With SE100 use economical mode instead.

Regards,
Vladislav Vasilev



2010/3/2 Илья Савин <savin at orn.ru>

>  Hi.
>
>
>
> I have SE100 with ge-2-port card. SEOS-6.1.5.1-Release.
>
> I want to use two link-aggregated ports for CLIPS with dot1q pvc. I find
> out that is must be Access Link Group. I am trying to use this
> configuration:
>
>
>
> link-group test1 access
>
>  encapsulation dot1q
>
>  qos hierarchical mode strict
>
>  dot1q pvc 10
>
>
>
> port ethernet 2/15
>
>  no shutdown
>
>  encapsulation dot1q
>
>  link-group test1
>
>
>
> port ethernet 2/16
>
>  no shutdown
>
>  encapsulation dot1q
>
>  link-group test1
>
>
>
>
>
> But when I trying to add second port to link-group, I see that message:
>
>
>
> [local]Redback(config-port)#link-group test1
>
> % Cannot add more than one link from same slot in the link-group
>
>
>
> Please, could anyone help me to resolve this problem?
>
>
>
> WBR,
>
> Ilya Savin.
>
>
>
>
>
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20100302/b1441dfb/attachment.html>