[rbak-nsp] subsriber port / card redundancy

[Christopher O'Shea]

Under the port put "encapsulated dot1q"
On Aug 26, 2011 4:20 AM, "Marcin Kuczera" <marcin at leon.pl> wrote:
> Yuri Shefer wrote:
>> You should check link-group configuration guide:
>>
>> "In non-economical mode (the default), circuit information on active
>> ports is replicated on all standby ports. After an active port fails,
>> no packets are lost when the standby port becomes active."
>
> [bgp1]R0_SE600(config)#port eth 1/4
> [bgp1]R0_SE600(config-port)#link-group test
> % Cannot group the port to link-group. Link-Group type and port encaps
> do not match
> [bgp1]R0_SE600(config-port)#show config port 1/4
> Building configuration...
>
> Current configuration:
> !
> card 10ge-4-port 1
> !
> port ethernet 1/4
> no shutdown
> !
> end
>
>
> [bgp1]R0_SE600(config-link-group)#show config link
> Building configuration...
>
> Current configuration:
> !
> !
> link-group test access
> encapsulation dot1q
> dot1q pvc 100 encapsulation multi
> service clips dhcp context clips
> circuit protocol pppoe
> bind authentication chap maximum 2000
> !
>
>
> No other than "access" allows mi to behave as on physical port, to put
> subscribers clips + pppoe + others on it..
>
> Any idea what's wrong ?
>
> Regards,
> Marcin
>
>
>
>>
>> On Wed, Aug 24, 2011 at 12:28 PM, Marcin Kuczera <marcin at leon.pl> wrote:
>>> hello,
>>>
>>> let's assume that I have SE600 with 2 4x10G cards.
>>>
>>> I would like to make i.e. port 1/3 to serve subscribers (pppoe/clips)
and
>>> port 2/3 is supposed to be "hot standby" port.
>>> So in the case of failure, all subscribers will go via card 2 port 3.
>>>
>>> Is there such a possibility ? (I suppose that databases on both cards
would
>>> have to be synchronized in a meaning of subscribers).
>>>
>>> Both 1/3 and 2/3 will be connected to the same switch, same VLANs.
>>>
>>>
>>> Maybe aggregated port aggregating 1/3 an 2/3 will do it ?
>>>
>>
>
>
>
>
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20110826/9b548208/attachment.html>