[rbak-nsp] how to configure track "ip sla reachability " in redback se600

[dale d.g.]

Hi! Im new to redback and in desperate need of help. I would like to know how to configure route tracking in this system. it's like ip sla reachability in Cisco world in which, you check status of the primary WAN IP to route its LAN. If primary WAN IP is down, it's LAN will then be routed to Secondary WAN IP. Additional Info: Primary and Secondary WAN IP are of the same interface and same "non-local" context.  Already tried adding metric in ip route statement but still, LAN IP block still routes to primary even if its down.


Thanks!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20140807/489bb7da/attachment.html>