[rbak-nsp] OSPF

[Maciej Hiller]

Hi Brandon

it is working config

#sh conf cont local
Building configuration...

Current configuration:
!
context local
!
  no ip domain-lookup
!
  interface TO-RTR-A p2p
   ip address 10.0.1.14/30
   ip mtu 9170
!
  interface TO-RTR-B p2p
   ip address 10.0.1.10/30
   ip mtu 9170
!
  interface lo loopback
   ip address 10.255.255.5/32
!
  router ospf 1
   area 0.0.0.0
    interface lo
     passive
    interface 10.0.1.10
     authentication md5 OSPF-AUTH-KEY1
    interface 10.0.1.14
     authentication md5 OSPF-AUTH-KEY1
!
  key-chain OSPF-AUTH-KEY1 key-id 1
   key-string encrypted **************************
!
  router mpls
   interface TO-RTR-A
   interface TO-RTR-B
!
  router ldp
   interface TO-RTR-A
   interface TO-RTR-B
   interface lo
!

#sh ospf nei

   --- OSPF Neighbors for Instance 1/Router ID 10.255.255.5 ---

NeighborID      NeighborAddress Pri State    DR-State IntfAddress     
TimeLeft
10.255.255.12   10.0.1.9        128 Full     Other    10.0.1.10       34
10.255.255.10   10.0.1.13       128 Full     Other    10.0.1.14       35

#sh ldp nei
PeerFlags: A - LocalActiveOpen, D - Deleted, R - Reseting, E - 
OpenExtraDelay
            N - OpenNoDelay, P - SetMD5Passwd, T - RetainRoute, F - 
FlushState
            X - ExplicitNullEnabled, C - ExplicitNullStatusChanging
            G - Graceful Restart Supported, L - Session Life Extended
            * - Reachable via RSVP-TE LSP , U - Unrecognized Notification 
Capable
            V - Reachable Via Tunnel-Shortcut , W - Typed wildcard FEC 
capable
SHld - Session Holdtime Left, HHld - Hello Holdtime Left

NeighborAddr    LDP Identifier        State   Flag    SHld HHld 
Interface
10.255.255.10   10.255.255.10:0       Oper    G       20   14   TO-RTR-A
10.255.255.12   10.255.255.12:0       Oper    G       20   10   TO-RTR-B

Regards,

Maciej

W dniu 2014-08-28 19:09, Brandon Leeberg napisał(a):
> Forgive me in advance, as I am a redback novice.
> 
> What we are trying to do is create an MPLS circuit between two redback
> routers (SEOS 11.1.2.5p2). Local contexts are already connected, and I
> believe I have the MPLS and PW config down, but I am having a heck of
> a time configuring OSPF. I have a loopback on each of the two routers
> (local contexts), and every config I have tried has failed to bring up
> an OSPF neighbor connection. LDP connection came up between the two
> without any issue.  Can someone provide some configuration examples
> for connecting router 1 (loopback 10.255.255.1) to router 2
> (10.255.255.2) via OSPF?
> 
> Any assistance is much appreciated!
> 
> Brandon
> 
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp