[rbak-nsp] New CLIPS sessions does not start

[Илья Савин]

Hi, Rafal.

Thanks for your reply, we have a lot of subscriber licenses. We already
found out that we reached circuit count limit because we have configured
about 44000 subscriber vlans, much more than we actually need.

Regards, Ilya.


2015-01-28 20:29 GMT+03:00 Rafal <golem at mtm-info.pl>:

> Hello
>
> CCT means circuit, seems like too many circuits.
> Do you have any license ?
> We do not have any license installed and running more subscribers, I don't
> think it's mandatory to install any subscriber license on SE600
> for clips (we didn't hit 5100 on clips circuits, however sum of pppoe and
> clips its more). I think subscriber license is only for official tech
> support.
> Rafał
>
>
>
>
>
>
> Wednesday, January 28, 2015, 2:07:15 PM, you wrote:
>
>
> Hi all!
>
> We have a SE600, witch terminates all subscribers. Now we have 5099 active
> dynamic clips sessions. New sessions does not start, in logs we have this
> messages:
>
> Jan 28 16:39:51: [1/1:511:63:31/1/2/31]: %CLIPS-7-DHCP_E: Request from
> dhcpd discarded - slot cct limit reached:
>
> What does that mean? What is CCT?
> We have configured subscriber licenses for mutch more than 5100
> subscribers.
>
> Regards, Ilya.
>
>
>
>
> --
> Best regards,
> Ozga Rafal                          mailto:golem at mtm-info.pl
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20150129/f0753401/attachment.html>