[VoiceOps] CPE IAD recommendations

[Scott Berkman]

It’s also a linux box, so if you can figure out crosstool you can build any binary from source to run on there.  It’s an ARM based processor if I remember correctly.

 

But yes as Johnathan mentioned the syslog has the MOS scoring for each call leg so there is lots that can be done from that data.  They also have a great EMS that can collect, report, and send email notifications based on MOS thresholds.

 

                -Scott

 

From: anorexicpoodle [mailto:anorexicpoodle at gmail.com] 
Sent: Thursday, September 17, 2009 3:08 PM
To: Jonathan Thurman
Cc: Scott Berkman; VoiceOps at voiceops.org
Subject: Re: [VoiceOps] CPE IAD recommendations

 

Edgemarcs spit out per-call MOS scoring and RTP stats on VoIP calls, so while not quite iperf, it should get a little closer to the meat of what you care about. They are really fantastic devices, and we make heavy use of them. 



On Thu, 2009-09-17 at 11:26 -0700, Jonathan Thurman wrote: 

 
On Thu, Sep 17, 2009 at 11:02 AM, Scott Berkman <scott at sberkman.net> wrote:
> Did you look at the Edgemarc's?  You sound like you need a 4508T4:
> ftp://ftp.edgewaternetworks.com/pub/docs/datasheets/EM_4508T4_4508T4W_Datash
> eet.pdf
> 
> I really recommend that you give them a shot and include this product in
> your evaluation.
 
I must have missed that...  Too many data sheets floating around in my
head.  The device looks very promising.  If it had iperf installed it
would almost be perfect!
 
-Jonathan
_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org
https://puck.nether.net/mailman/listinfo/voiceops
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/voiceops/attachments/20090917/04031d48/attachment.html>