[VoiceOps] PRI Gateway Supporting 1 - 3 PRI's

Max Clark mclark at phyber.com
Tue Dec 10 19:58:21 EST 2013


So for installations requiring more than 2x T1s what's the recommendation?


*Max Clark*
Managing Director | Phyber Communications
+1 (213) 929 1700 | mclark at phyber.com

Visit us at www.phyber.com

Hosting | Network | Voice


On Mon, Dec 9, 2013 at 8:12 PM, Jay Hennigan <jay at west.net> wrote:

> On 12/9/13 4:52 PM, Max Clark wrote:
> > I'm assuming that the Adtran TA900 has a high precision clock. Do they
> > come in 4x PRI configurations?
>
> It has an internal oscillator for T1 clock, but not of BITS type
> accuracy.  You'll get slips if you have a BITS-timed T1 connected with
> the Adtran set to internal clock.  Of course you can set it to
> synchronize from line.
>
> We've never had any problems driving a stand-alone PBX from its internal
> clock.
>
> I haven't evaluated the precision of its time-of-day clock.  It supports
> NTP so this hasn't been an issue.
>
> Maximum number of PRIs supported is two on the -e models, even though
> they have four T1 interfaces, only two of them support TDM voice.  The
> other two (or all four if you want) can be used for data as PPP, HDLC,
> or frame-relay.
>
> --
> Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net
> Impulse Internet Service  -  http://www.impulse.net/
> Your local telephone and internet company - 805 884-6323 - WB6RDV
> _______________________________________________
> VoiceOps mailing list
> VoiceOps at voiceops.org
> https://puck.nether.net/mailman/listinfo/voiceops
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/voiceops/attachments/20131210/d24b7355/attachment.html>


More information about the VoiceOps mailing list