[VoiceOps] Audiocodes Mediant 2000 - BootP

[Morten Isaksen]

Hi,

As far as I remember you need to send the IP address of the TFTP
server in the tftp option of bootp/dhcp.

Then check the log on the tftp server for the files it requests.

/Morten


On Tue, Jan 24, 2017 at 12:53 PM, jay binks <jaybinks at gmail.com> wrote:
> Hey guys,
>
> I have one particular Audiocodes Mediant 2000 SIP / ISDN gateway.
>
> It seems that it doesn't have firmware on it, as it simply sits there
> sending BootP requests.
> ( found by watching packet captures from its ethernet )
>
> Does anyone have any insight into the DHCP options AudioCodes require, to
> make these guys grab a new firmware via TFTP ?
>
> I've got BootP responses going back to it, but for the life of me, I can not
> make it request anything over TFTP.
>
> I have looked at trying the Audiocodes TFTP/Boop application, but the
> version I have won't run on any recent windows.
>
> if anyone has the BootP application ( and how to make it run ), that would
> be great.
> if you have any info on how to make the device grab a new firmware via
> standard DHCP / TFTP config that would also be brilliant.
>
> On another note, the manual says this has a serial port.
> does anyone know where to find this ?? :)
>
> --
> Sincerely
>
> Jay Binks
>
> _______________________________________________
> VoiceOps mailing list
> VoiceOps at voiceops.org
> https://puck.nether.net/mailman/listinfo/voiceops
>



-- 
Morten Isaksen