[VoiceOps] SPA112 ATA to Buzzer

[Adam Cunningham]

We have a client who has a buzzer in their shop connected to an SPA112.
This is part of the huntgroup on inbound calls to the main number. The
issue is that it is supposed to follow the standard ring cycle and it no
longer does. Used to be connected to an analog port of an Avaya IP Office.

It is an old AC powered one. Connected to the ATA, it buzzes for half a
second maybe then waits till the following ring. We've tried changing the
ring voltage on the ATA with no luck.

Anyone have any suggestions? Maybe even another product to try? (sub $100
range).
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/voiceops/attachments/20190402/8a91df3f/attachment.html>