[VoiceOps] ATA To Connect to Mitel PBX
brian.e.heinz at gmail.com
Fri Apr 12 12:41:52 EDT 2019
Mitel sells their own line of ATA's which are just re-badged Mediatrix
C7's. If you have access to their tech support (usually have to be an
authorized dealer) you should be able to get their full documentation on
which units have been certified, and the specific config guides for those
On Fri, Apr 12, 2019 at 11:34 AM Nate Burke <nate at blastcomm.com> wrote:
> I've only had to provide POTS termination to 1 MITEL system. I tried
> using Linksys/Cisco SPA and Grandstream ATA's, then finally put in an
> Adtran TA904 (2nd gen). The Adtran seemed to give the least number of
> issues with Lines getting stuck open, Echo, etc. But the (former)
> customer was still complaining about some issues when they closed up shop.
> I now need to provide 6 analog lines to hand off to an existing MITEL.
> Is there an ATA that's better than a TA908 for doing "Acceptable" POTS
> to a MITEL?
> VoiceOps mailing list
> VoiceOps at voiceops.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the VoiceOps