[VoiceOps] Old PA System setup

[Keln Taylor]

Valcom has great support. I would call them and ask them. Most likely
you'll need a separate power source.

On Thu, Apr 18, 2019, 5:40 PM Darin Steffl <darin.steffl at mnwifi.com> wrote:

> Hey guys,
>
> https://www.valcom.com/pdf/v1030c_v1036c.pdf
>
> We're trying to find the best way to interface 3 old Valcom speakers
> V-1030c to an IP paging system.
>
> I have a Snom PA1 but that won't work as we initially thought because
> speakers need 4 wires on a 24v power system. So 2 wires are for 24v power,
> and the other 2 are for audio. The snom only has a positive and negative
> output that feeds passive speakers, not active speakers like these.
>
> What is the best way to utilize these 3 speakers or should we just replace
> the speakers? We're trying to keep budget to a minimum for them so we would
> prefer to utilize the same speakers but what's the best way to power them
> and feed them audio using the existing 2-pair RJ11 cable they use?
>
> Thank you
>
> --
> Darin Steffl
> Minnesota WiFi
> www.mnwifi.com
> 507-634-WiFi
> <http://www.facebook.com/minnesotawifi> Like us on Facebook
> <http://www.facebook.com/minnesotawifi>
> _______________________________________________
> VoiceOps mailing list
> VoiceOps at voiceops.org
> https://puck.nether.net/mailman/listinfo/voiceops
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/voiceops/attachments/20190418/c6d43f4c/attachment.html>