[VoiceOps] Old PA System setup

[Darin Steffl]

It was being fed from an old Nortel pbx using rj11. One pair for power and
one for audio.

So really if I can just feed it 24v, the snom should still work if I put in
a line level adapter? Can't I just turn the output way down on the speaker
output to achieve the same thing?

On Fri, Apr 19, 2019, 7:38 AM Brian Hales <brianhales at trueipsolutions.com>
wrote:

> You can use the Snom PA1 with those valcom speakers. You just need to use
> a valcom power supply. If the speakers where existing, there is most likely
> a 24 power supply there now. If not you can order one form valcom.  They
> measure their power in VPUs, each speaker has a VPU rating. Make sure you
> get one large enough to handle all the speakers.
>
>
>
>
>
>
>
> [image: https://img.newoldstamp.com/f/000/012/u555.png?5852f657df370]
> <http://trueipsolutions.com/>
>
> *Brian Hales*
>
> *Chief Tech. Officer* | *True IP Solutions LLC*
>
>
>
> p: (910) 249-4255 m: (910) 305-0676
>
> w: http://trueipsolutions.com/
>
>
>
> See what's new with us on LinkedIn:
>
> [image: cid:image002.jpg at 01D257A4.94DEAD00]
> <https://www.linkedin.com/company/true-ip-solutions-llc>
>
>
>
>
>
>
>
>
>
>
>
> *From: *VoiceOps <voiceops-bounces at voiceops.org> on behalf of Darin
> Steffl <darin.steffl at mnwifi.com>
> *Date: *Thursday, April 18, 2019 at 6:40 PM
> *To: *VoiceOps <voiceops at voiceops.org>
> *Subject: *[VoiceOps] Old PA System setup
>
>
>
> Hey guys,
>
>
>
> https://www.valcom.com/pdf/v1030c_v1036c.pdf
>
>
>
> We're trying to find the best way to interface 3 old Valcom speakers
> V-1030c to an IP paging system.
>
>
>
> I have a Snom PA1 but that won't work as we initially thought because
> speakers need 4 wires on a 24v power system. So 2 wires are for 24v power,
> and the other 2 are for audio. The snom only has a positive and negative
> output that feeds passive speakers, not active speakers like these.
>
>
>
> What is the best way to utilize these 3 speakers or should we just replace
> the speakers? We're trying to keep budget to a minimum for them so we would
> prefer to utilize the same speakers but what's the best way to power them
> and feed them audio using the existing 2-pair RJ11 cable they use?
>
>
>
> Thank you
>
>
>
> --
>
> Darin Steffl
>
> Minnesota WiFi
>
> www.mnwifi.com
>
> 507-634-WiFi
>
> [image:
> http://www.snoitulosten.com/wp-content/uploads/2010/01/facebook-small.jpg]
> <http://www.facebook.com/minnesotawifi> Like us on Facebook
> <http://www.facebook.com/minnesotawifi>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/voiceops/attachments/20190419/05747579/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2796 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/voiceops/attachments/20190419/05747579/attachment-0001.jpg>