I think EtherChannel might do the trick...
-- elijah
On Wed, 7 Mar 2001, Kent Yu wrote:
> Vinod,
>
> Apart from others suggested, you could also try to put them into one bridge group, and create a BVI interface.
>
> HTH
> Kent Yu
>
>
> ----- Original Message -----
> From: Vinod Anthony Joseph Cherunni
> To: cisco-nsp@puck.nether.net
> Sent: Wednesday, March 07, 2001 8:54 AM
> Subject: [nsp] REG: Dual Ethernet Ports on Cisco 7206-VXR
>
>
>
> Dear All,
>
> In a Cisco 7206-VXR with two Ethernet ports (One avaialable on the NPE-300, & another as a module), Is it not possible to build system level redundancy by physically connecting both the ports on a single switch. I am unable to define both ports to be part of the same IP subnet. Is there any workaround for this.
>
> Kindly enlighten me
>
> With warm regards,
> Vinod.
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:31 EDT