Danny,
It is an RSP8 - which only goes in a 7500... ;)
As far as RSP4 performance, 1000 line configs save in 2-4 secs. RSP8 in
20-30, 100 lines.
I cannot find a DDTS on this. Anyone have it?
thx,
chris
-----Original Message-----
From: Danny Sutantyo [mailto:dsutanty@dsutanty-wkst.sc.intel.com]
Sent: Tuesday, March 13, 2001 6:27 PM
To: Martin, Christian
Cc: 'cisco-nsp@puck.nether.net'
Subject: Re: [nsp] RSP8 and SLLOOOWWW 'wr mem' performance
I think depends on the router you are using, routers like 7500, it's slow
to write mem...
DS
On Tue, 13 Mar 2001, Martin, Christian wrote:
> Folks,
>
> Has anyone seen a significant increase in NVRAM access time over RSP4 when
> writing a config to it? I am seeing a 100 line config take 20-30 seconds
to
> save, and with HSA, about 45-60 seconds total.
>
> Any ideas? I know it's a larger NVRAM - maybe this is it?
>
> Running 12.0(11)S3
>
> thx,
> ./chris
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:32 EDT