Re: Keepalives mistmatch Juniper-Cisco

From: Robert Craig (rcraig@juniper.net)
Date: Thu May 02 2002 - 21:11:27 EDT


The intervals are jittered by +- 25%.

Robert.

On Thursday, May 2, 2002, at 05:12 PM, German Martinez wrote:

> While I was performing some debugs, I noticed that there is Keepalive
> time
> mismatch on a POS interface interconnecting a Cisco router to a Juniper
> router. Even though both routers have keepalives set by default (10s)
> interval, the Cisco router is displaying the following message
> "POS10/1/0
> - Keepalive time mismatch - should be 10 secs, is 8".
>
> Any clue ?
>
> German



This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:35 EDT