Hi all,
In JUNOS 5.2 is supposed to support Martini. I see from the
documentation that for a circuit configuration you must configure the
Virtual Circuit ID. Now the questions are:
- Is this configured paramenter mapped directly to the VC ID field in
the LDP signalling VC FEC Element?
- Does Juniper's implementation of Martini use the Group ID for
anything?
- Does it use the VC Type values as defined in the draft, that is:
0x0001 Frame Relay DLCI
0x0002 ATM AAL5 VCC transport
0x0003 ATM transparent cell transport
0x0004 Ethernet VLAN
0x0005 Ethernet
0x0006 HDLC ( Cisco )
0x0007 PPP
0x8008 CEM [8]
0x0009 ATM VCC cell transport
0x000A ATM VPC cell transport
- Does it support all the encapsulation types or are there
restrictions?
Thanks in advance.
Javier.
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:39 EDT