Hi,
I'm new to Juniper routers, so please forgive me if this is a FAQ (I
couldn't find anything in the digest):
I'm trying to set up an M40 to redistribute routes from OSPF to BGP,
exchanging with a Cisco 7507. The M40 sees the routes from the Cisco just
fine, but the Cisco doesn't receive anything. Is there anything I need
to do to emulate the Cisco "redistribute ospf <...>" statement?
The relevant bits of the configs are below. Thanks in advance for any
help!
- Markolf
*** Cisco:
interface ATM1/0/0.8 point-to-point
ip address 192.168.201.225 255.255.255.252
pvc 100/38
vbr-nrt 103515 51757 10000
encapsulation aal5snap
!
router bgp 65500
bgp log-neighbor-changes
redistribute ospf 100
[neighbours...]
neighbor 192.168.201.226 remote-as 64000
no auto-summary
!
*** Juniper:
interfaces {
at-1/0/0 {
unit 0 {
encapsulation atm-snap;
vci 100.38;
family inet {
address 192.168.201.226/30;
}
}
}
fe-6/0/0 {
unit 0 {
family inet {
address 10.0.24.253/24;
}
}
}
}
protocols {
bgp {
log-updown;
group 52-72 {
type external;
peer-as 65500;
neighbor 192.168.201.225;
}
}
ospf {
area 0.0.0.0 {
interface fe-6/0/0.0;
interface at-1/0/0.0;
}
}
}
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:42 EDT