[cisco-voip] Polycom SE200 H.323 Gatekeeper w/ CCM 4.1(3)

[Dave Wolgast]

I'm hoping someone out there has some experience with this platform...I have
established a Gatekeeper-controlled H.323 trunk with the SE200, and can now
make audio calls to my Polycom VSX endpoints.  What I don't know how to do
is to set up dialing in the other direction (VSX -> CCM endpoints).

The system was configured with a single site.  Do I need to add a site in
order to make this happen?  Where do I put dial-plan information (If 1000 is
dialed, send to the H.323 trunk, etc...).

Any help is greatly appreciated.

-- 
Dave Wolgast
Livonia, NY
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070803/4bfdc3b7/attachment.html