[cisco-voip] Freeing up DSPs

[steve.siltman at assurant.com]

Hi All,

I noticed that a couple of our remote office routers Conference Bridge 
profiles were unregistered with Call Manager.  Taking a closer look, we 
are low on available DSP's.  Doing a show interface ser 0/1/0:15 on our 
international voice circuit, the bottom of the display shows Timeslots(s) 
Used:16.  Does this mean that this is a fractional E1?  I have pri-group 
timeslots 1-31 configured on the controller E1.
I changed the pri-group timeslots to 1-16 and was able to register the 
Conference Bridge profile after the DSP's were freed up.  Just wondering 
if I've taken away timeslots or not. 

Our documentation on the international sites doesn't show the voice 
circuit orders.  I'm unable to tell how the circuit was ordered and how 
many timeslots.

Thanks,

Steve Siltman
Assurant Corporate Technology
Network Engineer - Cisco CCVP
Work: 651-361-4752
Cell: 651-336-5563
steve.siltman at assurant.com
**************************************************************************************
This e-mail message and all attachments transmitted with it may contain legally privileged and/or confidential information intended solely for the use of the addressee(s). If the reader of this message is not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, forwarding or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately and delete this message and all copies and backups thereof.

Thank you.
**************************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080709/5ffbfcde/attachment.html>