[cisco-voip] Hairpinning Fax line on an H323 gateway

[Ed Ellerbee]

Greetings!

I'm not having any success hair pinning a DID off a PRI out an FXS port on
an H.323 gateway. I see the q931 info the DID coming in, it is failing
because of unallocated number.

setup: Branch office Cisco 2801 running 12.4(13e), 23 channel PRI in port
0/3/1:23, DID range 8675300 - 8675320, fax is 8675309, connected to FXS port
0/0/0. All other incoming and outgoing calls are functional.

My dialpeers:

dial-peer voice 3 pots
 huntstop
 destination-pattern 8675309
 direct-inward-dial
 port 0/0/0
!
dial-peer voice 100 voip
 destination-pattern .T
 progress_ind setup enable 3
 voice-class codec 1
 session target ipv4:10.10.10.10
 incoming called-number 86753..
 dtmf-relay h245-alphanumeric
!
dial-peer voice 1 pots
 destination-pattern 9T
 progress_ind alert enable 8
 progress_ind progress enable 8
 direct-inward-dial
 port 0/3/1:23

I pulled all the dial-peers off except dial-peer 3. It would answer at that
point, and return a dialtone, but I could not get it down the FXS hole. I
tried adding preference to the dial-peers and altering the dial-peer hunt
order to no avail. I have not found anything on cisco or other forums, but i
am half blind /shrug.

Thanks in advance!
Edward
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080518/ec67f992/attachment.html