[cisco-voip] Invalid information element contents

[Shine Joseph]

The issue was fixed. I think Wes is spot on. it wa sthe outgoing codec setting on the voice port. by default the compand-type is ulaw and this ned to be set to alaw for the carrier for basic-net3 switch types.

Thanks guys for the help.

Cheers,
Shine
  ----- Original Message ----- 
  From: Wes Sisk 
  To: Shine Joseph 
  Cc: cisco-voip at puck.nether.net 
  Sent: Saturday, June 13, 2009 9:13 AM
  Subject: Re: [cisco-voip] Invalid information element contents


  There bearer cap is a bit odd, 0x8090A1 is more common.  
  you might try forcing the bearercap:
  http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080874155.shtml


  otherwise the calling party plan/type of unknown/unknown is suspicious.  many carriers do not like those.  Either remove calling party or step through the permutations of national/isdn/...  Along those same lines you typically need to provide full 10 digit cgpn out to carrier.


  It could be the specific channel id, not all isdn protocols allow specific channel request at setup.


  /Wes



  On Jun 12, 2009, at 4:41 PM, Shine Joseph wrote:


  Hi,

  I am configuring a H323 GW with CUCM6.x to be dialed out via ISDN BRI. I can sucessfully receive the calls, but when calls are being dialled out, the calls are not being sent out. The ISDN Q931 debug shows as follows. Can anyone sggest what may be the issue?
  -----------------------------------
  ISDN BR0/0/0 Q931: Applying typeplan for sw-type 0x1 is 0x0 0x0, Calling num 93111501
  ISDN BR0/0/0 Q931: Sending SETUP  callref = 0x001F callID = 0x8027 switch = basic-net3 interface = User 
  ISDN BR0/0/0 Q931: TX -> SETUP pd = 8  callref = 0x1F 
          Bearer Capability i = 0x8090A2 
                  Standard = CCITT 
                  Transfer Capability = Speech  
                  Transfer Mode = Circuit 
                  Transfer Rate = 64 kbit/s 
          Channel ID i = 0x81 
                  Preferred, B1 
          Calling Party Number i = 0x0081, '93111501' 
                  Plan:Unknown, Type:Unknown 
          Called Party Number i = 0x80, '0414602914' 
                  Plan:Unknown, Type:Unknown 
          Sending Complete
       ISDN BR0/0/0 Q931: RX <- RELEASE_COMP pd = 8  callref = 0x9F 
          Cause i = 0x82E404 - Invalid information element contents
  ----------------------------------------
  Thanks in advance.

  Shine
  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090614/273082a2/attachment.html>