[cisco-voip] fast busy on UCCX trigger

[Tanner Ezell]

Verify:
1. You do not have any dialing restrictions from use of Partitions and CSSs
(use DNA to verify)
2. The DN exists in Unified CM
3. The CTI Ports exist and are registered to UCCX in Unified CM
4. The UCCX box is "IN_SERVICE"

Tanner Ezell
On Mon, Oct 19, 2009 at 10:31 AM, Sechaba Mokoena <sechabam at gmail.com>wrote:

> Hi,
>
> I've setup an application in UCCX, but I'm constantly receiving a fast busy
> when I dial the trigger. I've gone though my script, the application, and
> prompts, but I can't detect a problem. I've checked CoS on CTI ports and the
> CTI route point, but everything looks fine. Does anyone have a suggestion as
> to where I can focus my search to correct this problem.
>
> Kind regards,
>
> Sechaba Mokoena
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Regards,
Tanner Ezell
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091019/3fb74fd1/attachment.html>