[cisco-voip] Mobile Connect Issue - Cisco Mobility

[Jamie Weatherhead]

Hi Chris,

 

I have now managed to sort that out and can send the call to my mobile
by press the mobility softkey. 

 

However, once I'm connected to my mobile, how do I send the call back to
my desk phone? I have pressed my line on the desk phone, but the
following message appears:

 

No Conference Bridge

 

Thanks for you help.

 

Regards,

Jamie

 


Consider the environment - Think before you print

The contents of this email are confidential to the intended recipient and may not be disclosed. Although it is believed that this email and any attachments are virus free, it is the responsibility of the recipient to confirm this. 

You are advised that urgent, time-sensitive communications should not be sent by email. We hereby give you notice that a delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).

Details of Charles Stanley group companies and their regulators (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/

________________________________

From: Chris Clouse [mailto:Chris.Clouse at cdw.com] 
Sent: 30 October 2009 13:32
To: Jamie Weatherhead
Subject: RE: Mobile Connect Issue - Cisco Mobility

 

The owner userid is not set on the phone.

 

~Chris

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jamie
Weatherhead
Sent: Friday, October 30, 2009 6:26 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Mobile Connect Issue - Cisco Mobility

 

Morning All,

 

I am in the process of testing Mobile Connect on Call Manager 6.1(3). So
far I have managed to configure the publisher and phone with a single
number reach that does work. I have successfully added multiple devices
which will all ring simultaneously for incoming calls.

 

However, when I am on an active call and attempt to switch to my mobile
phone by pressing the 'Mobility' softkey I get the following message:

 

Mobile Connect Off

You are not a valid Mobile Phone

 

Have I missed something during the configuration stage?

 

Any help would be appreciated.

 

Thanks

 

Regards,

Jamie

 


Consider the environment - Think before you print

The contents of this email are confidential to the intended recipient
and may not be disclosed. Although it is believed that this email and
any attachments are virus free, it is the responsibility of the
recipient to confirm this. 

You are advised that urgent, time-sensitive communications should not be
sent by email. We hereby give you notice that a delivery receipt does
not constitute acknowledgement or receipt by the intended recipient(s).

Details of Charles Stanley group companies and their regulators (where
applicable), can be found at this URL
http://www.charles-stanley.co.uk/contact-us/disclosure/
<http://www.charles-stanley.co.uk/contact-us/disclosure/> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091030/0e0160f5/attachment.html>