[cisco-voip] Independent PRIs -- Single Router

[Jim Reed]

Due to contract obligations, we need to connect PRIs from two (2) different vendors to a single router.  I think I've got a fairly firm grasp on what needs to be done but thought I would run it by this group to see if I'm missing anything.

Fortunately, I can have the DIDs from one PRI moved to the other so it's my intent to have all inbound calls one (1) PRI and all outbound calls on the other.

Once the contract is up on the more expensive PRI, we'll contract for a second from the other vendor and bond all forty-six (46) channels together.

My assumption is that I need only a single gateway address and just identify which interface (port) to use when the caller makes an outbound call.  Everything is configured H323.

Any advice, hints, tips, suggestions, etc., will be greatly appreciated.  There will be a few analog devices off fxs ports but that is pretty much a no brainer.  Just want to make sure I get things in Call Manager 4.2(3)sr4a and the 2851 router configured correctly.

Thank You...
--
Jim Reed
Technology Wrangler
Swift Communications, Inc.
970-683-5646 (Direct)
775-772-7666 (Cell)

"Did Adam and Eve
have navels?"
       --Martin Gardner

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100211/8f47e1cb/attachment.html>