[cisco-voip] 911 issue

[lelio at uoguelph.ca]

I think you are on the right track, route pattern, route group, etc.

Do you have external masks on each extension and check use calling  
mask on each pattern? Or do you put the mask in the route pattern  
itself?

You might want to also check with your service provider. Some will  
override whatever you put on a 911 call with your billing number  
unless you have made alternate arrangements.

Some things to look at.


…
Don't look at me, my iPod maid that spilling mistake.

On 2010-07-19, at 8:00 PM, "Haas, Neal" <nhaas at co.fresno.ca.us> wrote:

> Hello all,
>
>
>
> I have a 911 issue for are call manager 7.1.5. When we dial 9.911 it  
> only sends out our trunk ID. When I call any other number I get the  
> correct caller id. Where do I start to figure this one out? I have  
> looked I think everywhere (Route Pattern, Trunk, Partition) but  
> could not figure this one out!!!!!!
>
>
>
> Neal Haas
>
> County Of Fresno
>
> IT Analyst - ITSD, Communications
>
> 1020 S 10th St
> Fresno, CA  93702
>
> Desk 559.600.5890
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100719/70c7de64/attachment.html>