[cisco-voip] cannot direct call to Unity with TCL script

[Dew Swen]

Hi Craig,

But Unity talks g729 ?

-- 
Dew Swen
CCVP, CCNP



28.05.2010 14:11, Craig Staffin yazmış:
>
> Voip dialpeers are g729 by default
>
> Add codec g711 under the unity one.
>
> Craig Staffin
> Lead voice consulting engineer - CCNA, CCVP, CCIE# 25802 (Voice)
> Core BTS
> +1 262 754 2634
> craig.staffin at corebts.com <mailto:craig.staffin at corebts.com>
>
> On May 28, 2010, at 5:47 AM, Dew Swen <dew.swen at gmail.com 
> <mailto:dew.swen at gmail.com>> wrote:
>
>> The flow is something like that:
>>
>> I forwarded the call after 15 secs to a route pattern (666669999) 
>> from extention's line settings. Route pattern directs call to gateway.
>>
>> I created this dial-peer in order to trigger the tcl script:
>>
>> dial-peer voice 1111 voip
>>  service unity
>>  codec g711ulaw
>>  incoming called-number 666669999
>>
>> After that,  in order to sent call to Unity's pilot number (5000) I 
>> created this dial-peer:
>>
>> dial-peer voice 1112 voip
>>  destination-pattern 5000
>>  session target ipv4:10.10.10.11
>>
>> 10.10.10.11 is the CUCM's IP address.
>>
>>
>> Do I need a xcoder?
>>
>> Because when I directs call to another extention or PSTN number, it 
>> works fine.
>>
>> -
>> Dew Swen
>> CCVP, CCNP
>>
>>
>> 2010/5/28 Dew Swen <dew.swen at gmail.com <mailto:dew.swen at gmail.com>>
>>
>>     Hi there,
>>
>>     I want to direct call to Unity with a TCL script on a Cisco
>>     router. Script works fine when I direct call to another extention
>>     or PSTN number. But when I forward the call to Unity's pilot
>>     number, the call stays in suspense and hangs up.
>>
>>     The script is attached. First it plays a message then directs it
>>     to Unity.
>>
>>     Is there anything related codec issue? Any thoughts will be helpful.
>>
>>     Regards,
>>
>>     -- 
>>     Dew Swen
>>     CCVP, CCNP
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>> https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100528/ee786fe8/attachment.html>