[cisco-voip] Debugging calls going from CUCM to CUE AA?

[Zoltan.Kelemen at emerson.com]

Thanks, I'll check this, although in my experience codec mismatch won't
give you a busy tone, but disconnect after connection establishment
(ringing should work before capability negotiation). 

 

Regards,

 

Zoltan Kelemen
ETS & Information Security 
Global Operations (EMEA)
w: +40 364 731356 | m: +40 757 039093

 

From: Nate VanMaren [mailto:VanMarenNP at ldschurch.org] 
Sent: Thursday, October 07, 2010 1:02 AM
To: Kelemen, Zoltan [CORP/RO]; cisco-voip at puck.nether.net
Subject: RE: Debugging calls going from CUCM to CUE AA?

 

The words "remote site" got me.  CUE only does g.711.  If your regions
want something else, make sure that there is a transcoder resource
available.

 

When it's registered, it usually works, unless it's the codec mismatch.

 

-Nate

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
Zoltan.Kelemen at emerson.com
Sent: Wednesday, October 06, 2010 3:56 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Debugging calls going from CUCM to CUE AA?

 

Hi,

 

This might be a basic question (or a very complicated one) but how do I
debug calls routed from CUCM to a CTI route point registered from a CUE
module's AA application?

I'm thinking of basic troubleshooting first, like making sure the call
gets to the CUE at all or not. Something I could see with a q931 debug
on an ISDN line.

 

My problem is, I have an AA on a CUE at a remote site, registered to the
CUCM with Jtapi as a CTI route point. When dialed, the CTI Route point's
extension returns a busy tone, even though it looks like it's registered
to the Call Manager, CUE running etc.

 

CUCM 6.1.5, CUE 3.2.2 on a CUE-NM.

 

Any pointers welcome. 

 

Regards,

Zoltan Kelemen
ETS & Information Security
Global Operations (EMEA)
European Network Operations Engineer
Cluj-Napoca, Romania
zoltan.kelemen at emerson.com
w: +40 364 731356
m: +40 757 039093

 



NOTICE: This email message is for the sole use of the intended
recipient(s) and may contain confidential and privileged information.
Any unauthorized review, use, disclosure or distribution is prohibited.
If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101006/700ea127/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1916 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101006/700ea127/attachment.jpg>