[cisco-voip] how replace the busy or ringback tone with customprompts?

[Ahmed Elnagar]

There is a lot of requests for the below, I don't know if there is a
feature request on Cisco or not.

 

 Best Regards;

  Ahmed Elnagar

  Senior Network PS Engineer

  Mob: +2019-0016211

  CCIE#24697 (Voice)

  

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Syed Khalid Ali
Sent: Friday, October 15, 2010 7:27 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] how replace the busy or ringback tone with
customprompts?

 

hi,

If a user is already on a call, the callie hears the ringback tone. Can
we change this to custom prompts like the " user is on another call"

We are  running CCM 4.2 and CRS 4.0

-- 
Thanks,
Syed Khalid Ali

Disclaimer: NOTICE The information contained in this message is confidential and is intended for the addressee(s) only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorized use, disclosure, copying or alteration of this message is strictly forbidden. Raya will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any malicious code or virus being passed on. Views expressed in this communication are not necessarily those of Raya.If you have received this message in error, please notify the sender immediately by email, facsimile or telephone and return and/or destroy the original message. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101015/6d1f3213/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1801 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101015/6d1f3213/attachment.jpg>