[cisco-voip] Outbound calls failing after IOS upgrade

[Venkata Sasanka Pathi]

I think Chris suggestion should work. I think you know this but its just a suggestion. If you are doing telnet dont forget to put terminal Monitor. and then put debug. It often happens to me. :-). Check the traces to see what exaCtly happening .


Warm Regards, 
Venkata Sasanka.pathi(-91 950 265 2290)
Consultant | unified communications 
Locuz Enterprise Solutions Ltd. (A Subsidiary of 3i-Infotech)
(office:914066115512)
 sasanka.pathi at locuz.com
www.locuz.com




-----Original Message-----
From: Sechaba Mokoena [mailto:sechabam at gmail.com]
Sent: Tue 9/21/2010 20:05
To: Venkata Sasanka Pathi
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Outbound calls failing after IOS upgrade
 
Hi Venkata,

I ran a debug isdn q931 initially and I didn't see any call coming into the
router. I haven't tried removing the gateway from call manager yet, I'll try
that. I received a fast busy signal when my call failed. Thanks for the
info.

Kind regards,

Sechaba Mokoena

On Mon, Sep 20, 2010 at 11:11 AM, sashank <sasanka.pathi at locuz.com> wrote:

>  Check the following:
>
>
>
> Debug voip dialpeer
>
>
>
> Do this to check any call coming from the call manager to the gateway. If
> the call is coming in then we have something to do with the gateway. Remove
> the gateway on  the CUCM and add the gateway once again.  What are u getting
> when you are calling a number. Is it a fast busy signal or some error.
>
>
>
> Warm Regards,
>
>
>
> Venkata Sasanka.pathi(-91 950 265 2290)
>
> Consultant | unified communications
>
> Locuz Enterprise Solutions Ltd. (A Subsidiary of 3i-Infotech)
>
> (office:914066115656)
>
>  sasanka.pathi at locuz.com
>
> www.locuz.com
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Sechaba Mokoena
> *Sent:* Saturday, September 18, 2010 8:14 PM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Outbound calls failing after IOS upgrade
>
>
>
> Hi,
>
> I recently upgraded my router to c2900-universalk9_npe-mz.SPA.151-2.T1.bin
> to support SRST 8.0. I upgraded so my 6921 phones would be supported in
> SRST. After upgrading I couldn't place any outbound calls, but I could
> receive calls. Using the CSIM start command from the router, I can dial any
> external number. Can anyone help here, according to prior IOS release notes,
> this issue should've been resolved.
>
> Kind regards,
>
> Sechaba Mokoena
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100921/ec051650/attachment.html>