[cisco-voip] dial peers and translations

[Erick Wellnitz]

Simple question I just need a refresher.

On my CUBE, if I translate-outgoing called xxxx on the dial peer does my
destination pattern need to match the original number or the translated
number?  The dial peer guides are not quite clear in my mind.

Here is my dial peer and my translation rule.

voice translation-rule 4000
 rule 1 /^\+/ /9/
***replacing the + globalization with 9 for outbound PSTN access

dial-peer voice 4000 voip
 description Inbound Toll Bypass from XXXXX
 translate-outgoing called 4000
 preference 1
 destination-pattern +16304######   <-----should this be 916304######?
 session protocol sipv2
 session-taaget ipv4:172.16.7.12:5070
 incoming called-number +16304######
 dtmf-relay rtp-nte
 codec g711ulaw

Thanks in advance!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130529/0081cf84/attachment.html>