[cisco-voip] CUACS 10.5.1 and BLF?

[Justin Steinberg]

Enhanced includes Jabber for Everyone, so I would think you should be able
to stand up IMP server for this without needing Enhanced Plus.

On Tue, Sep 16, 2014 at 4:59 PM, Jason Aarons (AM) <
jason.aarons at dimensiondata.com> wrote:

>  page 20
>
>
> http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucmac/cuacs/10_5_1/install_admin_guide/CUACS1051GUIDE.pdf
>
>
>
> So the customer would need to upgrade licensing from Enhanced to Enhanced
> Plus for CUACS to work.  I made an assumption that the new CUACS worked
> like the old, and that IM&P wasn't mandatory for line status.  Somehow Matt
> Wyndhamm left that licensing Enhanced Plus cost/part out of his demo..
>
>
>
> https://www.youtube.com/watch?v=6mltZygLYuE
>
>
>
>
>
>
>  ------------------------------
> *From:* cisco-voip [cisco-voip-bounces at puck.nether.net] on behalf of
> Jason Aarons (AM) [jason.aarons at dimensiondata.com]
> *Sent:* Tuesday, September 16, 2014 4:41 PM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] CUACS 10.5.1 and BLF?
>
>
>
>  The operator noticed that there is no line status information in CUACS?
>
>
>
> I was assuming a Attendant Console Standard would show if the phone was
> on-hook vs off-hook.  The only Presence information I can find seems to be
> related to Jabber/IM&P
>
>
>
> Or should CUACS 10.5 show line state information?
>
>
>
> They couldn't keep CUBAC 9x as it was supported with CallManager 10.x.
> While it worked, it was unsupported. So the version change to CUACS had to
> happen.
>
>
> itevomcid
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140916/5147a103/attachment.html>