[Heath] SB-102 SS LMO

[G3OOU at aol.com]

In a message dated 02/09/2012 22:05:12 GMT Standard Time, k7mks at comcast.net 
 writes:

 
Are there any internal or external LMO lubrication points I should address  
while working on my SB-102.  The front panel is temporarily removed. 
Thank you, 
joe k7mks




Hi Joe
 
If the solid state LMO has the same multiple tag washer overturn stop  
mechanism as the SB101 valve LMO then a good idea to clean and relubricate that  
as well. The washer tend to stick together after a while.
 
73

Bob

Bob F Burns
C Eng,  FIET, MSE
Amateur Radio Callsign: G3OOU
Registered RSGB  Instructor
G-QRP Member No: 6907; Zone: 14, QRA: IO91WH; WAB:  TQ25
Secretary of Crystal Palace Radio & Electronics Club: _www.g3oou.co.uk_ 
(http://www.g3oou.co.uk/) 
Technical web site: _www.qsl.net/g3oou_ (http://www.qsl.net/g3oou) 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20120903/9d909f5f/attachment.html>