[nsp] RES: [nsp] Ethernet backup interface

From: Loureiro, Rodrigo (rodrigo.loureiro@netstream.com.br)
Date: Thu Aug 03 2000 - 13:04:19 EDT

OK, I have forgotten this primary issue. The primary interfaces addresses
must be on the same subnet, as the virtual address, so it won´t work this
way.

Does anyone have another idea ?

Regards, 

--

Rodrigo Loureiro

-----Mensagem original-----
De: Zaheer Aziz [mailto:zaziz@cisco.com]
Enviada em: quinta-feira, 3 de agosto de 2000 13:48
Para: Loureiro, Rodrigo; cisco-nsp@puck.nether.net
Assunto: Re: [nsp] Ethernet backup interface

At 12:10 PM 08/03/2000 -0300, Loureiro, Rodrigo wrote:
>Hi all,
>
>I´ve been thinking about put two 7513 fastethernet interfaces (same router)
>connected to a Catalyst 2924 in  backup mode. Is it possible to implement
>this using the HSRP concept, i mean, setting up a virtual address on both
>interfaces, preempt and priorities, knowing the two interfaces are placed
in
>the same router?

HSRP works on a same subnet interfaces. IOS does not allow same subnet to
be configured on the same router.
you need two routers for HSRP to work

Zaheer
>
>
>Regards,
>--
>
>Rodrigo Loureiro
>Systems Engineer - Netstream Telecom 
>

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:14 EDT